How to Get Between Sydney Airport Terminals 2 and 3
Can you walk between Sydney Airport T2 and T3?
Yes. The simplest way to get from T2 to T3 at Sydney Airport is to walk through the P1 car park pedestrian connection. Sydney Airport gives an approximate walking time of five minutes; Qantas advises around seven minutes. Allow a little longer if you have bulky luggage, need a lift or are unfamiliar with the layout.
The route works in both directions. T2 and T3 are domestic terminals on the same side of the airport, unlike T1 International, which is in a separate precinct and cannot be reached on foot from the domestic terminals.
Walking routes between T2 and T3
Ground-level pedestrian route via P1
The airport’s signed pedestrian path connects the two terminal areas through the P1 car park precinct. This is usually the most straightforward option if you want to move directly between the terminals.
- From T2, head towards the public terminal exit and look for signs to T3, the T2–T3 walkway or the P1 car park pedestrian path.
- Follow the marked undercover pedestrian connection through the P1 area, staying on designated footpaths and crossings.
- Continue towards T3 and follow signs to Qantas check-in, departures or arrivals, depending on where you need to go.
For T3 to T2, use the same walkway in reverse, following the signs for T2 Domestic. The path is a pedestrian connection, not a route through aircraft gates or a transfer vehicle.
Underground pedestrian link near the train station
There is also an underground pedestrian connection associated with the Domestic Airport railway station. Qantas identifies the airport train tunnel link as another walking option between T2 and T3. Follow the terminal and pedestrian-access signs rather than boarding a train.
You do not need to buy a train ticket merely to walk between the two domestic terminals. Stay within the signposted public pedestrian areas; the ticket gates are for passengers using train services. If the route is unclear or temporarily diverted, airport staff can direct you to the available walking connection.

Which terminal do you need for your domestic airline?
Check the terminal shown on your booking or boarding pass before setting off. Sydney Airport lists these regular domestic terminal assignments:
|
Domestic terminal |
Airlines |
|
T2 |
Virgin Australia, Jetstar, Rex and FlyPelican |
|
T3 |
Qantas domestic flights |
Important update: Rex and FlyPelican moved all Sydney flights to T2 on 4 November 2026. Some older diagrams still show them at T3, so check current airport information rather than relying on an outdated image or a previous itinerary.
Changing flights between T2 and T3
A short walk does not mean a five-minute flight connection. The pedestrian routes are in public areas, so a traveller connecting from a gate in one terminal to a gate in the other should expect to leave the secure departures area and pass through security again at the onward terminal.
Before walking, check whether your checked baggage is transferred by your airline or whether you must collect it at baggage reclaim and check it in again. This can depend on the airlines, ticket arrangement and individual booking. Check your next boarding pass or departure screen for the correct check-in area and gate.
Allow time for disembarking, baggage collection if required, walking, check-in or bag drop, security screening and boarding. The airport recommends arriving at least one hour before a domestic departure when travelling with hand luggage and two hours when checking in bags; a connecting itinerary may require additional time based on airline requirements.
Walking with luggage or requiring assistance
The P1 connection is marked as an undercover pedestrian walkway on Sydney Airport’s domestic access map. Follow the designated footpaths rather than cutting across car park traffic lanes. Travellers with wheeled bags should allow extra time at crossings and terminal entrances.
The terminal maps also identify lifts and escalators for changes of level. If you use a wheelchair, have mobility concerns or need help moving between flights, contact your airline ahead of travel and ask airport staff which accessible route is currently available.
Sydney Airport is continuing upgrades at T2 during 2026, so temporary changes to check-in areas, signage or pedestrian access may occur. Follow current directions on site rather than relying solely on an older terminal illustration.
Where to check the T2–T3 map
For the latest layout, use Sydney Airport’s official terminal and pedestrian maps. The map collection includes T2 and T3 arrivals, departures and pedestrian directions for the domestic terminals.
If you are standing in a terminal and cannot find the connection, look for the signs to the other domestic terminal, P1 or the airport railway station. Staff at the information desks can help confirm the best walking route for your current location.
Latest Insights
- Where to Pick Up Passengers at Sydney International Airport
- Where to Pick Up Passengers at Sydney Airport
- How Do Qantas International-to-Domestic Transfers Work at Sydney Airport?
- How Do Qantas Domestic-to-International Transfers Work at Sydney Airport?
- Where to Catch the Shuttle Between Sydney Airport Terminals
- How to Transfer from Sydney International to the Domestic Terminals