Where to Catch the Shuttle Between Sydney Airport Terminals
Where are the T-Bus pick-up stops?
All three T-Bus boarding locations are outside the terminal buildings on the Arrivals level. The international and domestic stops are separate, so head to the stop for the terminal you are currently in—not the terminal you are travelling to.
|
Terminal |
Where to board the T-Bus |
|
T1 International |
Arrivals level, outside Arrival Hall B. Follow the signs for “T2 Domestic Transfer”. |
|
T2 Domestic |
Arrivals level, outside T2. Follow the terminal-transfer bus signs to the kerbside stop. |
|
T3 Domestic |
Arrivals level, outside T3. Follow the terminal-transfer bus signs to the kerbside stop. |
For a closer look at the stops and surrounding exits, open Sydney Airport’s official T1, T2 and T3 arrivals maps. Look for the “Transfer Bus” symbol on the appropriate arrivals map.
How to catch the shuttle from Domestic to International
If you are travelling from T2 or T3 to an international flight at T1, use the public arrivals area. The free T-Bus is a landside service, not a transfer bus that boards from an airline departure gate.
- At T2 or T3, follow the signs to Arrivals and collect any checked baggage you need to take with you.
- Exit to the Arrivals level kerbside and find the signed Terminal Transfer Bus stop outside your terminal.
- Board the T-Bus for T1 International. The road journey takes approximately 10 minutes.
- At T1, follow signs for Departures and your airline’s check-in area. Complete any required check-in, security and outbound passport-control procedures.
If you land at T3 on an eligible Qantas connection, check the airline’s own transfer instructions before leaving the secure area. Its dedicated service is different from the public T-Bus.

Where to board at T1 International
Travelling in the opposite direction? After clearing arrivals formalities at T1, head to the public Arrivals level and go outside Arrival Hall B. Follow the signs marked “T2 Domestic Transfer” to the Terminal Transfer Bus stop.
The bus serves the domestic terminal precinct, including T2 and T3. After you arrive, enter the correct domestic terminal for your onward airline and allow time for any required bag drop and security screening.
T-Bus operating hours, frequency and cost
Sydney Airport publishes the following details for its complimentary Terminal Transfer Bus:
- Fare: free for passengers travelling between terminals.
- Operating hours: 5:30 am to 10:30 pm.
- Frequency: approximately every 15 minutes.
- Journey time: approximately 10 minutes between the domestic and international terminal areas.
The journey time is the time spent on the bus, not the total time needed for a flight connection. Add time to find the stop, wait for the next departure and move through the next terminal. Check current information before travelling, particularly for an early-morning or late-night connection.
The T-Bus is not the same as an airline transfer bus
Sydney Airport has several services that may be called a shuttle or transfer bus. They do not all use the same boarding point.
Public T-Bus versus Qantas Terminal Transfer
The public T-Bus boards outside the Arrivals level at T1, T2 and T3. Qantas also operates a separate Terminal Transfer service for eligible connecting passengers. For eligible domestic-to-international transfers at T3, Qantas directs passengers to Gate 15, inside the terminal, rather than to the public T-Bus stop.
Airline transfer eligibility depends on the flights and booking arrangements. If an airline offers a connection service, follow its specific instructions instead of assuming that every shuttle uses the Arrivals kerb.
Other buses at the airport
Do not confuse the terminal shuttle with hotel shuttles, car-park shuttles or Sydney Buses Route 420. Those services have different purposes and may have different stops or fares. Check the destination shown on the bus and the sign at the stop before boarding.
What if the T-Bus is not running?
For journeys outside the T-Bus operating hours, or when a faster alternative suits your connection, Airport Link trains connect the International and Domestic airport stations. The train ride itself takes approximately two minutes, but fares apply and you still need time to reach the station and move through the terminals. Taxis and rideshare vehicles are also options, with pick-up arrangements and charges that differ from the free bus.
T2 and T3 are close enough to walk between, using the signed pedestrian route through the domestic precinct; Sydney Airport estimates about five minutes. You cannot walk between T1 International and the T2/T3 domestic terminals.
Allow enough time for your next flight
Choosing the correct bus stop is only one part of a connection. You may need to collect and recheck baggage, obtain a boarding pass, pass through security or complete immigration formalities. These steps can take considerably longer than the bus ride, especially if your flights are booked separately.
If you are unsure whether your bags are checked through or an airline transfer is available, ask your airline before you travel. You can also review Sydney Airport’s current terminal-transfer guidance for the latest published stop details and service arrangements.
Latest Insights
- Where to Pick Up Passengers at Sydney International Airport
- Where to Pick Up Passengers at Sydney Airport
- How Do Qantas International-to-Domestic Transfers Work at Sydney Airport?
- How Do Qantas Domestic-to-International Transfers Work at Sydney Airport?
- How to Get Between Sydney Airport Terminals 2 and 3
- How to Transfer from Sydney International to the Domestic Terminals