Where to Find the Sydney Airport Terminal 2 Map
Download the official Sydney Airport Terminal 2 maps
The most reliable starting point is the official Sydney Airport maps page. Under “T2 Domestic”, you will find three downloadable terminal plans:
- Sydney Airport terminal maps – official index
- T2 check-in map (PDF)
- T2 domestic departures and gate map (PDF)
- T2 domestic arrivals map (PDF)
If you are flying out of Sydney, open the check-in map first and then the departures map. If you are meeting an arriving passenger or collecting luggage, use the arrivals map. The PDFs can be saved on your phone for reference without reopening the website.
How to read the T2 domestic departures gate map
The T2 departures map shows the secure concourse, gate locations, food and retail areas, toilets, lifts, escalators and other facilities. Its layout is easiest to understand as two main gate piers connected by a central area with shops and a food court.
Pier A: gates 31–45
Pier A is the long concourse shown on one side of the map. It contains the gates numbered across the 31–45 range, with facilities distributed along the corridor. Follow the signs for your exact gate once you have passed security.
Ramp-level gates 46–48
The official departures plan shows gates 46, 47 and 48 in a separate ramp-level inset. It marks access by lift or escalator, so allow time to find the relevant level if your flight is allocated one of these gates.
Pier B: gate 49 and gates 52–59
Pier B is the second main gate corridor. The map places gate 49 near the connection to the central concourse and gates 52–59 further along the pier. A separate airport map also illustrates this section and its nearby toilets, gate lounges and multi-faith room.
Important: A printed gate map shows locations, not a live gate assignment. Check the flight information screens at the airport and follow the overhead signs, especially if your boarding pass does not show a gate or your gate changes.
Finding check-in, security and baggage reclaim
Before your flight: check-in and security
On the T2 check-in map, the departures hall and security-screening area are clearly marked. The plan also identifies accessible drop-off, lift and escalator access, self check-in and bag-drop facilities. Once you have checked in and completed any required bag drop, proceed through security to reach the departure concourses.
Check-in counter locations and airline arrangements may change. Use the overhead airport displays and your airline’s instructions rather than relying on a historical counter allocation printed on an older plan.
After landing: arrivals and baggage collection
The T2 arrivals map shows baggage reclaim carousels numbered 1–6, the arrivals hall, lifts, escalators and connections towards ground transport. Sydney Airport identifies the T2 meeting point on the arrivals level opposite baggage carousel 6.
If you need the airport train, follow the station signs from the domestic arrivals area. For taxis, buses, rideshare or passenger pick-up, refer to the ground-transport symbols and signs on the arrivals map rather than following the departures gate diagram.

Facilities you can find on the T2 map
The map legend helps you locate facilities without having to search through a long terminal directory. Depending on the map, it identifies:
- Toilets, including accessible facilities and baby-changing locations.
- Food and beverage areas, shops and the central food court.
- Lifts, escalators and connections between terminal levels.
- Gate lounges, information points, drinking fountains and first-aid facilities.
- Airline lounge areas and other passenger services shown on the concourse plan.
Two particularly useful landmarks are the Virgin Australia lounge, which Sydney Airport places just beyond security, and the multi-faith room opposite gate 55. The airport also provides parents’ rooms and free Wi-Fi throughout T2. For facilities that can move or change opening hours, use the airport’s current T2 facilities page.
Using a T2 map on your phone or inside the terminal
A PDF is helpful for understanding the overall layout, but you can also use digital wayfinding while moving through T2. Sydney Airport supports Google Maps indoor navigation, including Indoor Live View for supported devices, to help locate gates, baggage reclaim and passenger services.
Airport wayfinding kiosks and overhead signs are another option if your phone battery is low or you would rather not rely on mobile data. For accessible routes, check the lifts shown on the map and use wheelchair-accessible routing options where available.
A practical approach is to save the relevant PDF before you travel, find your flight’s actual gate on the terminal screens, then use signs or indoor navigation for the final route. The floor plan and live flight displays serve different purposes.
Make sure you have the right Sydney Airport terminal
Terminal 2 is a domestic terminal. It is not the same building as Terminal 1 International or Terminal 3 Domestic, and each terminal has its own map. Check the terminal listed on your booking or airline information before planning your route.
T2 and T3 share the domestic precinct, and Sydney Airport says you can walk between them using the pedestrian route through the P1 car park, taking approximately five minutes. T1 is in a separate international precinct; you cannot walk between T1 and the domestic terminals. Use an airport transfer service or another suitable transport option when changing between T1 and T2.
For connections between terminals, see Sydney Airport’s terminal transfer guide.